If this is your first mod, we recommend taking a look at the modding help page.
Disassembly
1. First, remove the pommel ring and the battery holder.
2. Then loosen all the screws visible on the emitter.
3. Carefully pry off the cable bridges with a screwdriver.
4. The small metal pin on the activator box can be pulled out with pliers, so most of the box can be removed.
5. Under the housing that holds the switch there are two screws. Loosen them as well to expose the switch.
6. Desolder the wires from the switch and push the loose wires into the hilt.
7. Now pull all the internals out forward.
8. To remove the blade, tap both metal pins out of the blade mount with a steel pin punch (or a blunt nail) and a hammer.
9. The blade is now removed and, thanks to the „plug & play“ connector, can be reattached at any time. It can also be swapped with the Anakin ROTS (P&P version), since the connectors are identical.
