If this is your first mod, we recommend taking a look at the modding help page.
Disassembly
1. First, remove the end cap and the battery holder.
2. Then pry out the red button with a thin object.
3. Unscrew the screw and remove the socket.
4. Pry out the glass eye with a thin object.
5. Then unscrew the screw visible on the outside of the clamp and remove the nuts.
6. Also unscrew the two screws that sit in the switch mount.
7. Desolder the switch wires and push them into the housing.
8. Carefully pull out the two gold pins on each side with pliers.
9. Also remove the screw above the glass eye.
10. Now you can pull the blade holder together with the electronics out of the hilt toward the emitter.
