For the disassembly the following steps are necessary
- At first unscrew the locking ring and take out the battery-pack.
Picture 1
- After that lift off the panel around the activator carefully.
The panel is glued so lift it off at different point.
Picture 2,
Picture 3,
Picture 4
- Take out the screws thereunder, after this one can drop off the clamp.
Picture 5,
Picture 6
- Unfix the black screw under the emitter.
Picture 7,
Picture 8
- Now the electronics can be pulled out of the hilt at the top
Picture 9 und
Picture 10
- The two bolts must be pressed in.
After his the wiring can be separated from the soundboard.
Picture 11,
Picture 12,
Picture 13
- Now also the emitter is removable.
Picture 14
Picture 15
- Strike out the aglet, which holds the blade into the bladeholder, with a nail or another pointy tool.
Picture 16,
Picture 17
- Pull out the blade out of the bladeholder carefully.
Picture 18,
Picture 19
- To remove the LED-strip the aglet has to be striked into the attachment of the LED-strip.
After this the LED-strip and ist attachment can be removed.
Picture 20,
Picture 21
|
The Lightsaber
···