How its done:
- At first detach the locking cap and the battery tray.
- Afterwards the inner casing, which surrounds the battery tray, has to be detached. For it is glued to the hilt it has to be lifted with a thicker screwdriver first. Grasp the loose piece and detach the whole casing with strong pulling and turning.
Foto 1
- Now unscrew the covertec wheel as well as the silver screw underneath the activator.
Foto 2 and
Foto 3
- Unplug the little pin at the activator's side next so the red coping can be lifted at several places. Detach the screw underneath.
Foto 4 and
Foto 5
- Now knock out the pin - be patient and carefully for it can be plugged very firmly!
Foto 6
- Afterwards detach the electronic casing downwards.
Foto 7
- Remove the shifter, which connects the LED-strip to the soundboard, too.
Foto 8
- Unplug the aglet from the LED-strip's casing as well with a sledge and a pin (or a blunt nail).
Foto 9
- Now one can remove the blade easily.
Foto 10
- For getting to the LED-strip knock a little pin into the tube's inner holding. Afterwards extract the holding from the tube and detach the strip.
Finished the dismounting is!
Have fun with tinkering your Team Saberproject
|
Das Lichtschwert
···