Obi-Wan Kenobi ROTS - Disassembling
[ back ]

For the disassembly the following steps are necessary
  1. At first unscrew the locking ring and take out the battery-pack. Picture 1
  2. Now lift off the panel on the activator box with a thin tool. Picture 2
  3. Now take out the screws there under, after this one can remove the clamp. Picture 3
  4. Unsolder the switch
  5. Next unfix the screw which connects the bladeholder with the hilt. Picture 4
  6. Now push the bladeholder with the blade and electronics out of the hilt at its bottom. Picture 5 und Picture 6
  7. Strike out the aglet, which holds the blade into the bladeholder, with a nail or another pointy tool. Picture 7
  8. Pull out the blade out of the bladeholder carefully Picture 8
  9. To remove the LED-strip the aglet has to be striked into the attachment of the LED-strip, after this the LED-strip and its attachment can be removed. Picture 9

Obi-Wan Kenobi ROTS Disassembling
Obi-Wan Kenobi ROTS Disassembling
Obi-Wan Kenobi ROTS Disassembling
Obi-Wan Kenobi ROTS Disassembling

Obi-Wan Kenobi ROTS Disassembling Obi-Wan Kenobi ROTS Disassembling Obi-Wan Kenobi ROTS Disassembling Obi-Wan Kenobi ROTS Disassembling Obi-Wan Kenobi ROTS Disassembling

That's it. To reassemble the saber just follow the steps the backwards.
Obi-Wan Kenobi ROTS Disassembling

Note:
To get to the soundboard the blade holder has to be cut open at both sides lengthwise. This has to be done carefully to guarantee its function afterwards.

Star Wars, its Characters, Lightsabers, Costumes and all connected objects are intellectual property of Lucasfilm. 1977-2014 Lucasfilm Ltd. & TM and . All rights reserved. Usage with approval. The content of this page is Saberproject 2006-2014
Saberproject Logo
···   Home   ···   Terms of use   ···   Contact   ···   Shop   ···   Forum   ···   Guestbook   ···   Chat   ···   Platzhalter