- At first remove the locking ring (pommel) and the battery tray.
Photo 1
- Detach the blade afterwards. One just needs to unscrew the emitter.
Photo 2
- Now unscrew the Covertec wheel.
Photo 3
- . Remove the activator next. To do so, one needs to knock the two small steel pins into the hilt with a thin tool. After that one can cautiously draw off the red cap.
Photo 4
- Then one detaches the screw underneath, so one can pull out the black switch.
Photo 5 and
Photo 6
- Take off the big, silver screw that lies directly underneath the rotary switch.
Photo 7
-
Now one can push out the complete chassis with the electronics out of the back end.
Photo 8
The disassembling is finished.
|
The Lightsaber
···