For disassembling the Lightsaber you need:
- Crosshead screwdriver
- Flat screwdriver or another flat tool
- Thorn or another pointed tool
- Hammer
The disassembling is to be implemented this way:
- Unscrew the pommel first and remove the battery pack.
Picture 1
- Afterwards detach the great grip cautiously by lifting it with a flat tool at the corners first and remove it slowly. It only consists of one piece of plastic with a rubber-grip on it, so it might break with a little too much force.
Picture 2
- After this the small grip shown at the picture needs to be lifted as well. Therefore work as shown in 2.
Picture 3
- Now the two screws that were covered by the grips need to be unscrewed.
Picture 4 and
Picture 5
-
Then knock out the two metal pins at the emitter with the thorn or another pointed tool
Picture 6 and
Picture 7
- Remove the sticker next.
Picture 8
- Now the emitter can be detached with a little effort and force. However it can not be detached completely.
Picture 9
- Drawing on the body can be opened easily now. The golden part above the emitter can be removed, too
Picture 10
- Remove the blade from the saber and separate it from the soundboard. Here at last a picture of all parts.
Picture 11
- Now the LED-strip can be pulled out of the blade as well. Therefore the little splint needs to be knocked into the plastic part.
Afterwards the LED-strip can be pulled out easily and the black plastic parts can be removed.
Picture 12
Picture 13 and
Picture 14
Finished!
| |
The Lightsaber
···